Your priority equipment
Identify equipment that must operate simultaneously and loads that can remain off during an outage.
Perkins · 150 kW · Diesel
Perkins diesel generator 150 kW
Perkins 150 kW diesel generator: Perkins 1106D-E70TAG3 engine, Stamford UCI274E alternator and Deep Sea DSE6120 controller, in a sound-attenuated enclosure with a 600 L tank, at 347/600 V three-phase (also available in 120/240 V single-phase, same price). $49,000 CAD before taxes. Load-bank tested for 2 hours (10 to 110%) and built for heavy-duty use, 24/7. Sold by Solution NRJ in Terrebonne.
Clear pricing to plan your purchase
Your configuration 150 kW
$49,000 CAD
Before taxes. Same price regardless of the voltage selected for the ordered configuration.
- Engine heater included
- Intelligent battery charger included
- Preparation with oil and Prestone coolant included
Shipping is extra. Transfer switch sold separately. Installation must be specified in the quotation.
Request a quote for this modelIs this the right output for your needs?
The configuration shown is 600 V. Provide the characteristics of your electrical system and equipment to confirm voltage, phases and project compatibility.
To confirm this configuration meets your needs, assess equipment that will operate together and the power required at startup.
Motor starting
A pump or compressor may require more power at startup than during normal operation. Provide nameplate information to assess these requirements.
Your electrical configuration
Voltage, phase count and connected loads must be considered together. Confirm the configuration before ordering.
Unsure of your power requirements? Send an equipment list and nameplate photos. We can help identify the information needed to select a model.
Specifications of the shown configuration
- Fuel tank
- 600 litres
- Dimensions (L × W)
- 125.98 × 44.49 in (320 × 113 cm)
- Model
- 150 kW
- Engine
- Perkins 1106D-E70TAG3, 6 cylinders, turbocharged
- Alternator
- Stamford
- Shown voltage
- 600 V
- Power factor
- 0.8 (347/600 V three-phase): 150 kW / 187.5 kVA
- Also available in
- 120/240 V single-phase, 120/208 V and 277/480 V three-phase, same price
- Enclosure
- Sound-attenuated enclosure
- Standard controller
- Deep Sea DSE6120
- Stated certifications
- CSA · EPA Tier 3
- Stated runtime
- 12 hours; load and conditions to be confirmed
- Warranty
- 1 year or 1,500 hours, whichever comes first
Plan the connection
Voltage and phases must match your installation. Equal pricing across voltages does not mean the equipment can freely switch voltage. Confirm the ordered configuration before delivery.
Fuel capacity and runtime
Fuel capacity alone does not determine runtime. Consumption varies with electrical load and operating conditions. Specify your desired duration so fuel requirements can be assessed.
Warranty: 1 year or 1,500 hours, whichever comes first. Terms are specified in the quotation.
Full technical specifications
Perkins engine
- Model
- 1106D-E70TAG3
- Cylinders
- 6 inline, 4-stroke
- Aspiration
- Turbocharged, aftercooled
- Displacement
- 7.0 L
- Bore × stroke
- 105 × 135 mm
- Compression ratio
- 16.8:1
- Speed
- 1,800 rpm
- Speed governor
- Electronic (ECM), speed droop ≤ 1%
- Cooling
- Liquid
- Oil (total capacity)
- 8.4 L
- Fuel use at full load
- About 38 L/h
- Starting
- Electric 12 V DC
Stamford alternator
- Model
- Stamford UCI274E, CSA approved
- Excitation
- Brushless, self-excited, single bearing
- Frequency
- 60 Hz at 1,800 rpm
- Power factor
- 0.8 (347/600 V three-phase)
- Voltage regulation
- ± 1% (no load to full load)
- Insulation class
- H
- Protection rating
- IP23
DSE 6120 controller
- Display
- Voltage, frequency, engine speed, battery voltage, running hours
- Alarms
- Over/under speed, low oil pressure, high temperature, failure to start, charger fault, emergency stop
- Automatic shutdown
- Low oil pressure, high temperature, over/under speed, failure after 3 start attempts
Equipment and testing
- Load bank test
- 2 hours, from 10% to 110% load, with protection checks; adjusted and ready to use
- Exhaust
- Industrial silencer and flexible hose
- Included
- Block heater, smart battery charger, glow plugs
- Design standards
- ISO 8528, NEC, CEC
Data for the configuration shown. The ordered configuration is confirmed in the quotation.
Would you like automatic operation during an outage?
An automatic transfer switch transfers power between the utility and the generator. In a compatible installation, it detects an outage and coordinates transfer to backup power and then back to the utility.
Transfer switch selection and connection must be adapted to your installation with a qualified professional. Its price is specified separately in the quotation.
Plan with your installer
- Priority circuits and transfer equipment
- Location, ventilation and exhaust according to manufacturer requirements
- Access for delivery and maintenance
Your questions before choosing
Can it supply my entire building?
That depends on actual loads, simultaneous use and starting requirements. Floor area or room count alone cannot determine the required output.
How is runtime determined?
Runtime depends on fuel capacity, consumption at the operating load and operating conditions. Confirm load assumptions before relying on a stated duration.
What should I send for a quotation?
Send a priority equipment list, nameplate photos, voltage and phase count if known. Also describe automatic transfer needs and desired operating duration.
How should maintenance be planned?
For the Perkins models shown, do the first break-in service (oil and oil filter) at 60 hours, then plan oil changes every 250 hours and fuel filter replacement every 500 hours. The engine manual also specifies calendar intervals, other tasks and special conditions.
Tell us about the equipment you need to power
Tell us what must stay running during an outage. With information about your installation, we can prepare a tailored quotation and specify the proposed configuration.
Request a quote for this modelSolution NRJ
438-350-6979
ventes@solutionnrj.com
Return policy
We do not accept returns.
See also
Our projects: generators delivered and installed, and workshop work, in photos.