Perkins · 10 kW · Diesel

Perkins diesel generator 10 kW

Name: Perkins 10 kW diesel generator
Brand: Perkins
SKU: perkins-10kw
Price: 12500 CAD
Availability: InStock

Perkins 10 kW diesel generator: Perkins 403D-11G1 engine, genuine Stamford alternator and Deep Sea DSE6120 controller, in a sound-attenuated enclosure with a 50 L tank. $12,500 CAD before taxes, in stock. Sold by Solution NRJ in Terrebonne.

Owner-supplied photo of the Perkins 10 kW — Photo supplied by Solution NRJ for this model. The delivered configuration is specified in your quotation.

Clear pricing to plan your purchase

Your configuration 10 kW

In stock

$12,500 CAD

Before taxes. Same price regardless of the voltage selected for the ordered configuration.

Engine heater included
Intelligent battery charger included
Preparation with oil and Prestone coolant included
Glow plugs

Shipping is extra. Transfer switch sold separately. Installation must be specified in the quotation.

Request a quote for this model

Is this the right output for your needs?

Separate essential equipment from loads that can wait. This list helps assess a 10 kW configuration without assuming every circuit must operate together.

To confirm this configuration meets your needs, assess equipment that will operate together and the power required at startup.

Your priority equipment

Identify equipment that must operate simultaneously and loads that can remain off during an outage.

Motor starting

A pump or compressor may require more power at startup than during normal operation. Provide nameplate information to assess these requirements.

Your electrical configuration

Voltage, phase count and connected loads must be considered together. Confirm the configuration before ordering.

Unsure of your power requirements? Send an equipment list and nameplate photos. We can help identify the information needed to select a model.

Specifications of the shown configuration

Model: 10 kW
Engine: Perkins 403D-11G1, 3 cylinders
Alternator: Stamford
Shown voltage: 120/240 V
Power factor: 1.0 (120/240 V single-phase): 10 kW / 10 kVA
Prime power: 9 kW
Enclosure: Sound-attenuated enclosure
Standard controller: Deep Sea DSE6120
Stated certifications: CSA · EPA Tier 3
Fuel tank: 50 litres
Warranty: 1 year or 1,500 hours, whichever comes first

Plan the connection

Voltage and phases must match your installation. Equal pricing across voltages does not mean the equipment can freely switch voltage. Confirm the ordered configuration before delivery.

Fuel capacity and runtime

Fuel capacity alone does not determine runtime. Consumption varies with electrical load and operating conditions. Specify your desired duration so fuel requirements can be assessed.

Warranty: 1 year or 1,500 hours, whichever comes first. Terms are specified in the quotation.

Download the 10 kW technical sheet (PDF)

Full technical specifications

Perkins engine

Model: 403D-11G1
Cylinders: 3 inline, 4-stroke
Aspiration: Naturally aspirated
Displacement: 1.1 L
Speed: 1,800 rpm
Speed governor: Mechanical, speed droop ≤ 1%
Cooling: Liquid
Starting: Electric 12 V DC

Stamford alternator

Model: Stamford, CSA approved
Excitation: Brushless
Frequency: 60 Hz at 1,800 rpm
Power factor: 1.0 (120/240 V single-phase)

DSE 6120 controller

Display: Voltage, frequency, engine speed, battery voltage, running hours
Alarms: Over/under speed, low oil pressure, high temperature, failure to start, charger fault, emergency stop
Automatic shutdown: Low oil pressure, high temperature, over/under speed, failure after 3 start attempts

Equipment and testing

Factory testing: At 50, 75, 100 and 110% load, with protection checks
Exhaust: Industrial silencer and flexible hose
Included: Block heater, smart battery charger, glow plugs
Design standards: ISO 8528, NEC, CEC

Data for the configuration shown. The ordered configuration is confirmed in the quotation.

Would you like automatic operation during an outage?

An automatic transfer switch transfers power between the utility and the generator. In a compatible installation, it detects an outage and coordinates transfer to backup power and then back to the utility.

Transfer switch selection and connection must be adapted to your installation with a qualified professional. Its price is specified separately in the quotation.

Plan with your installer

Priority circuits and transfer equipment
Location, ventilation and exhaust according to manufacturer requirements
Access for delivery and maintenance

Your questions before choosing

Can it supply my entire building?

That depends on actual loads, simultaneous use and starting requirements. Floor area or room count alone cannot determine the required output.

How is runtime determined?

Runtime depends on fuel capacity, consumption at the operating load and operating conditions. Confirm load assumptions before relying on a stated duration.

What should I send for a quotation?

Send a priority equipment list, nameplate photos, voltage and phase count if known. Also describe automatic transfer needs and desired operating duration.

How should maintenance be planned?

For the Perkins models shown, plan oil changes every 250 hours and fuel filter replacement every 500 hours. The engine manual also specifies calendar intervals, other tasks and special conditions.

Compare models

All Perkins models · Kubota generators

Useful guides

Tell us about the equipment you need to power

Tell us what must stay running during an outage. With information about your installation, we can prepare a tailored quotation and specify the proposed configuration.